CRHFPP0402000NC Bowey large flow water treatment folding filter element
Overview
1. Large diameter of 6 inches/152mm, one end open, the filtering fluid flows from inside to outside, it can cause pollution by falling impurities after filtering.
2. The deep folding structure and multi-layer filter membrane combination have higher filtration efficiency than traditional melt blown and wire wound filter elements. At the same time, the large diameter design of the filter element increases the effective filter area and can greatly extend the life of the filter element and reduce the number of filter elements. And reduce the size of the filter housing, saving costs.
3. Suitable for filtration of various large-flow fluids: RO security filtration, seawater desalination filtration, cooling water filtration, chemical raw materials, beverages, biopharmaceuticals, solvents, water filtration.
4. The filter element is produced, cleaned, tested and packaged in a clean room with a cleanliness of 10000.
Features
Structural material: melt-blown fine PP polypropylene fiber filter membrane
Support film: PP polypropylene
Frame: PP polypropylene
Gasket/seal ring: EPDM EPDM, Viton fluorine rubber, Silicone silicone rubber, Buna-N nitrile rubber, Teflon PTFE coated fluorine rubber
Dimensions:
Outer diameter: 6"<152mm>
Length: 20"<508mm>, 40"<1016mm>, 60"<1524mm>
Performance parameters
Filter accuracy: 1, 3, 4.5, 10, 20, 40μm
Working temperature: 140οF <60℃>
It is recommended to replace the pressure difference: 30psid<2.1bar>
Application
Food and beverage industry
Seawater desalination treatment
Cooling water system
Industrial water
Reverse osmosis prefiltration
Process water and wastewater treatment
Filtration accuracy/liquid flow rate and initial pressure difference
Filter rating μm |
Initial pressure difference 20” /508mm <×100>bar/lpm |
Initial pressure drop 40”/1016mm <×100>bar/lpm |
Initial pressure drop 60”/1524mm <×100>bar/lpm |
1 |
0.0090/0.0164 |
0.0049/0.0089 |
0.0040/0.0073 |
3 |
0.0070/0.0127 |
0.0035/0.0064 |
0.0027/0.0049 |
4.5 |
0.0042/0.0076 |
0.0022/0.0040 |
0.0017/0.0031 |
10 |
0.0035/0.0064 |
0.0019/0.0035 |
0.0010/0.0018 |
20 |
0.0025/0.0046 |
0.0013/0.0024 |
0.0009/0.0016 |
40 |
0.0010/0.0018 |
0.0007/0.0013 |
0.0005/0.0009 |
Recommended to optimize the system performance with a single filter element with large flow:
Length of filter element |
Recommended working flow rate |
20” |
110/25 |
40” |
220/50 |
60” |
308/70 |
Our honors
Package & Shipment
Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods.
Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
Product Categories
Stainless Steel Metal Filter Element
We could assist you to prepare Invoice certification or CO:
General certificate of origin (CERTIFICATE OF ORIGIN) issued by the commodity inspection agency.
CCPIT CEERTIFICATE OF ORIGIN issued by the Chamber of Commerce;
Certificate of Origin issued by us manufacturer or exporter.